Firewalla AP7 Ceiling Version (Status and Updates)

Pinned

Comments

259 comments

  • Avatar
    Firewalla

    @Steve the form likely closed already. If you signed up the same form a while back, you should get the coupon email 

    0
    Comment actions Permalink
  • Avatar
    Firewalla

    FYI

    AP7C Sale is April 15, 9 AM PDT. Order using this link: https://firewalla.com/products/firewalla-ap7-ceiling

    • The final coupon is $5 off each unit. Sorry, we can't do more, the tariffs are giving us a terrible headache. 
    • We did expedite some units via air, so some of you (FIFO) will likely receive your unit within 24 hours of ordering. 
    • The number of available units is very limited. Please order early: https://firewalla.com/products/firewalla-ap7-ceiling
    • If no "negotiations" happen, the next batch of the AP7D and AP7C will be more expensive. 
    2
    Comment actions Permalink
  • Avatar
    Larry

    Sucks to have to be dealing with the fluctuating tariff business, but wherever the pricing happens to land next week will make a big impact if I purchase both AP7Cs I was planning on.  

    0
    Comment actions Permalink
  • Avatar
    Firewalla

    The initial set will be what's indicated on the product page today (at most +9.12 dollars more than what's there). The second shipment is likely more expensive. At the moment, it is pretty chaotic ... 

    1
    Comment actions Permalink
  • Avatar
    Firewalla

    Reminder, AP7C Sale is April 15, 9 AM PDT. Order using this link: https://firewalla.com/products/firewalla-ap7-ceiling

    We expect the initial quantity to sell out quickly. However, due to weekend tariff exceptions, we may be able to add more units to this sale or have another batch sale next week (or the week after). Because of the ongoing tariff situation, we cannot confirm whether the price for the second batch will be the same or higher.

    3
    Comment actions Permalink
  • Avatar
    Andrew Miller

    I must say i do wish if we will filled out the survey months ago. I wish we could have pre ordered or had a 24 reservation or something. 

    Because i have to try and buy during work meetings now :( 

    Edit - I was able to order just now luckily stock held until after my meetings :) 

    1
    Comment actions Permalink
  • Avatar
    Firewalla

    Our operations team has been working extra hard to get units over after the tariff exception... (also before that ...)

    1
    Comment actions Permalink
  • Avatar
    Ali Alsaleh

    I bought my 4 x AP’s right at 9am before my meeting started. Super excited.

    0
    Comment actions Permalink
  • Avatar
    DanM

    Hello Firewalla Team, nice job navigating this exciting introduction. Thank you or your excellent products and community support

    0
    Comment actions Permalink
  • Avatar
    Firewalla

    Thank you DanM, we are hoping everyone will love their AP7C/AP7D :) If not, ping me, we will get it fixed

    0
    Comment actions Permalink
  • Avatar
    Ali Alsaleh

    Question for the firewalls folks: I am currently using a Trendnet TPE-147GI to provide POE+ to my AP’s. With the new AP7C coming, will this work or do I need to get new injectors that are 10Gb specific?

    https://a.co/d/3CqoH2r

    0
    Comment actions Permalink
  • Avatar
    Firewalla

    It should work. The spec says this is 1Gbit, so I am not sure it will work with 10Gbit or not. 

    0
    Comment actions Permalink
  • Avatar
    Seth

    @Firewalla any ceiling units going out today?

    0
    Comment actions Permalink
  • Avatar
    Firewalla

    Shipping Update:

    • Waiting for the first batch to arrive in the warehouse. 
    • No ETA, but likely in the next 5 days

    (Due to the tariff chaos, everything is slower, and we are doing our best to move things as fast as possible) 

    1
    Comment actions Permalink
  • Avatar
    Paul Munk

    @firewalla as of this morning I see that AP7C and AP7D are still available. I guess you were able to get more on the way.

    0
    Comment actions Permalink
  • Avatar
    Firewalla

    AP7D is already in the warehouse; that shipment was shipped later than the AP7C and arrived early... When tariff goes up and down, shipping also gets congested.

    1
    Comment actions Permalink
  • Avatar
    Firewalla

    Shipping Update:

    • Around 20% units will be sent out 4/18 or 4/21 (pacific time)
    • Next batch time is unknown. 

    (Shipping is not deterministic at the moment, so please be patient, we will do our best to update everyone as we have something)

    5
    Comment actions Permalink
  • Avatar
    John Harrold

    I just got a shipping notification. Can you tell us where they are shipping from? General location, not the actual address.

    1
    Comment actions Permalink
  • Avatar
    Paul Munk

    Should be California.

    1
    Comment actions Permalink
  • Avatar
    DanM

    I’m on East Coast, mine always seem to come out of Anaheim

    1
    Comment actions Permalink
  • Avatar
    John Harrold

    Anaheim is close to me -- I live in the east bay (San Francisco). I'm really excited to get these. I have Netgear right now. I find them very frustrating. 

    0
    Comment actions Permalink
  • Avatar
    DanM

    You will love these. I was combination Router/Wifi Netgear, then Eero thru Gen 3, Netgear Orbi Pro, TP-Link Omada and not Firewalla. Most troublesome was Orbi. Omada is very nice. The Firewalla for myself, consistent, faster than any of my prior choices, lots of control but easy to setup. Most expensive, but well worth the investment. I can't wait to get my ceiling units as well. 

    1
    Comment actions Permalink
  • Avatar
    Ali Alsaleh

    Lucky. I ordered 4 of them right at 9am and still waiting.

    0
    Comment actions Permalink
  • Avatar
    John Harrold

    I was there with you, refreshing the webpage waiting for the order button to become active :).

    I only have the shipping number. The USPS are still waiting to receive the package. I think they are working hard to get through the orders. 

    0
    Comment actions Permalink
  • Avatar
    Ali Alsaleh

    Any idea when the next batch will ship?

    0
    Comment actions Permalink
  • Avatar
    Firewalla

    Will update once I get more concrete date. (At the moment, we are targeting end of this week for anohter 20%)

    1
    Comment actions Permalink
  • Avatar
    DanM

    Received my AP7C's today, two days earlier than projected and crossed the Easter weekend. Setup was fast and easy, update felt like it took longer than the desktops but maybe 5 mins. Used the 10G port on a PoE+ switch port. Have not tested PoE+ on the 2.5G, can't remember if that is a power port. My garage unit is in a 73F degree environment and AP back is measuring 117F. AP on its side right now until I get it mounted. That may interfere with the possibly more efficient horizontal conductive cooling. Would be nice if the AP's could display temps within the app, assuming that capability exists internally. Reason for garage install is to reach cameras outside the insulated garage car doors. Had temporarily used a AP7D until the AP7C arrived. Although not a proper AP7C install, the 2.4 GHz signal strength from either AP is about -64 dBm at Rx/Tx rate of 104 Mbps/130 Mbps. Equal and good

    1
    Comment actions Permalink
  • Avatar
    Firewalla

    117F is very normal for WiFi 7 devices; the back of the unit is a heatsink, and your WiFi 7 is fairly compact (1/3 of the volume of the AP7D), 6 data streams to process ... You seriously should not worry about it. 

    2
    Comment actions Permalink
  • Avatar
    Firewalla
    Shipping Update 4/24
    • 25% more units will be send out today
    • next batch likely next week ... (hopefully)
    3
    Comment actions Permalink
  • Avatar
    Ali Alsaleh

    Woot woot. Just got my shipping confirmation and it’s in USPS possession. Super excited to replace my Ubiquiti setup.

    2
    Comment actions Permalink

Please sign in to leave a comment.