Help us make the Firewalla Switch
Pinned Featured
Please fill out this survey: https://forms.gle/iuCZGmchSshjsTkb7
(By answering this survey, you will be automatically subscribed to Firewalla Newsletters)
- The pre-sale price will be decided later.
- Pre-sale discounts + pre-sale coupon will be sent to those who register
Firewalla Switch 10G (Switch X) Price > $699
- 8x10G RJ45 With POE++
- 4x10G SFP+
- Rack mountable
Firewalla Switch 2.5G (Switch SE) Price > $300
- 8x2.5G RJ45 with PoE+
- 2x10G SFP+
- Not rack mountable
About the upcoming pre-sale (aiming for July 7), two product variations will be available (both at the same price):
1. Early Access (Switch): This product variation is very limited and available only in the USA. (If you are outside of the USA, you will not be able to see it) These units will likely ship within days. (Final hardware and beta software)
2. Pre-sale (Switch): This is the pre-sale unit, where you buy at a discount (pay full upfront) and we likely ship them in September / October. (Same hardware and production software)
-
General Pre-sale is available to USA, UK, EU, AU, New Zealand, Canada, Singapore, Turkey, Israel, Switzerland, Hong Kong, and UAE
-
Other Countries: This product is FCC, CE, ISED, and RCM certified. Please verify your country allows personal imports for this equipment; as the importer, you are responsible for local customs requirements and processes.
Firewalla App 1.69.1 Will Support Both Switches
-
These units have CE/FCC/IC/RCM certifications. (So, if your country accepts it, or accepts personal imports, we should be able to ship)
As of pre-sale, it will be divided into two parts (both at the same price)
1. Early Access (Switch): This product variation is very limited and available only in the USA. (If you are outside of the USA, you will not be able to see it) These units will likely ship within days. (Final hardware and beta software)
2. Pre-sale (Switch): This is the pre-sale unit, where you buy at a discount (pay full up front) and we likely ship them in September / October. (same hardware and production software)
-
We may separate the early access and pre-order buckets for the sale. The early access side will have a limit of 1 unit per kind of switch. And the pre-order one has no limit. The number of pre-sale units will be limited ( a lot more than early access) due to parts limitations.
Early access delivery is within few days. (we fly them over from Taiwan ...) And pre-sale is September / early October.
https://help.firewalla.com/hc/en-us/community/posts/28643907379091/comments/52440182286611
-
Very much looking forward to this! If I can add one ask I haven't seen mentioned on the software end, it would be attention to push notifications. I have a cable puller at home, and this is an area where I've had trouble customizing alarms. Notifications would help me at least as much as ACL's and port protections.
-
Introducing the Firewalla Switch
https://youtu.be/wN5YNe76fBAPre-Sale Date: 7/7/2026 9 AM (USA/Pacific Time)
Use this link to order, and also sign up now for a coupon: https://firewalla.com/switch
(let us know if you like the video :) )
-
1. VLAN configuration can be pushed down from the firewalla to your firewalla switch
2. You will need to configure access ports, since it is not part of the original configuration
Since switches are layer 2, you can just attach the firewalla switch and then configure the access ports according to your own rule before making the final configuration.
-
Lestrod Gould good question; how big is the brownfield?
In general, if your network just work with VLAN's, it should be pretty easy to swap. The only issue will come up once the network starts to mix switches from firewalla; when this happens, VqLAN will become a problem; meaning if you have firewalla -> another switch, "another switch" traffic can't be fully managed and if "another switch" has too many devices running on it, the ACL entries on the firewalla switch may run out. (tracking, blocking ...)
-
Others users probable have a larger network than me but I will be looking to purchase 1x and 2se switches to replace my 3 cisco switches. Setup will be x as core switch with 2se up-linked to the core. I am looking to have minimum to no downtime as much as possible during swapping out existing switches with firewalla switches.
Please sign in to leave a comment.
Comments
446 comments