Prosumer - what to buy - how difficult to setup?

4,000 sf house on two floors. 1.2Gb cable internet service. I've been using an Orbi 6 Pro that supports VLANs, but it is EOL. I want:

1) House network for phones, computers, printers, Apple TV, music server, etc.

2) IOT network for IOT! Devices get access to the internet, but not the House network. Ideally devices on the House network can directly contact and interact with IOT devices without going through the cloud, but IOT devices can't initiate contact to the House network.

3) Guest network. Isolated from everything with internet access.

What do I buy and how is it wired up? I do have one ethernet cable between floors.

I'm a reasonably knowledgeable s/w guy with a working knowledge of networks, but not a network administrator. I don't want to spend hours defining rules for flows between ports because I'm sure I won't get it right.

Firewalla

August 03, 2026 00:43

What you want is to build a segmented network. What you need is (I assume you have a big network), is Firewalla unit (Gold SE, Gold Plus, Gold Pro) and also the same number of AP7's as your old Orbi;

To configure firewalla correctly, you will have some type of security experience. I assume you are, since, you already segmenting networks.

See if you understand this https://help.firewalla.com/hc/en-us/articles/4408644783123-Network-Segmentation

And also this https://help.firewalla.com/hc/en-us/articles/36325500638739-A-Secure-and-Better-Network-with-Firewalla-Part-4-Zero-Trust-Network-Architecture

Since everything is integrated, it shouldn't take much time to implement what you want.

Prosumer - what to buy - how difficult to setup?

Comments

Didn't find what you were looking for?