DHCP Not Working
I have a L3 switch that is connected to the Gold Pro using link aggregation; was working until latest update. I did some basic troubleshooting: (1) statically assigned an IP to the switch and everything started working then i changed back to DHCP and the switch went back to 0.0.0.0 (2) connected the switch to the ISP router, and the switch pulled an IP. Need some help troubleshooting this DHCP issue.
-
Yes, the switch is acting as a router. All the devices behind the switch can talk to each other but when the switch WAN interface is set to DHCP (Pull an IP from the Gold Pro) im getting 0.0.0.0 and the internet is down due to traffic can not route pass the switch; if i set the WAN port to static and assigned an IP within the Gold Pro network then i can route pass the Gold Pro and surf the internet. Unfortunately, the switch is the only device that support LAG other than the ISP router (which sits in the other side of the Gold Pro). Like i said in my previous post i tested the ability of the switch to pull an IP by bypassing the Gold Pro and connecting the switch straight into the ISP router and the switch pulled an IP, no issues...
Please sign in to leave a comment.
Comments
5 comments