Help with VLAN Configuration with TPLink AP and Netgear Switch on Firewalla Purple

Hello,

Please forgive me for having limited knowledge on VLANs. I'm trying to setup five SSIDs that are each on their own VLAN.

I'm using a Firewalla Purple SE. I have a TP-Link EAP610 AP and a Netgear GS308E Switch that I'm using for this. I have my TP-Link AP plugged into port 2 of the Netgear switch. When I enable the VLAN function in the EAP610 I get locked out of the admin screen and none of my devices can connect to the AP. The only way to get back in is to do a factory reset.

After a while I was able to create an SSID on VLAN 40 that worked, but other SSIDs on other VLANs get locked out. So I think the problem is the settings between my TP-link AP and Netgear Switch. I've attached screenshots of how I have my Netgear Switch configured for VLAN 40 which works, and VLAN 10 that doesn't work.

Any assistance would be appreciated. Thanks!

Firewalla

June 03, 2024 22:10

Did you setup the right PVID? see this https://help.firewalla.com/hc/en-us/articles/4408644783123-Network-Segmentation#h_01GQGEMSDB7VNYM2HZBYBMAQX9

Larry

June 04, 2024 16:34

Thanks for replying. I believe I did setup the right PVID. The article in the link you posted seems to work when there's only one VLAN on each port. Do you have an article for placing multiple VLANs on a single port, I think this where I'm running into trouble.

Thanks!

June 04, 2024 20:53

Shouldn't be any difference if you are trunking multiple VLAN's on the same port. I assume by multiple, you are setting the port as tagged port (trunk port)

Help with VLAN Configuration with TPLink AP and Netgear Switch on Firewalla Purple

Comments

Didn't find what you were looking for?