BUG: VLAN Change Network Display

Follow

Joshua Manton

• November 05, 2023 05:01

This should be filed under bug to try and reproduce:

Device: FW Gold

Box Ver: 1.9770

App Ver: 1.55

I have a tagged VLAN along with a standard LAN on the same port. Both are on different subnets and have dhcp enabled. When I plug in a new device, it gets an IP from the LAN network. I then update the device for the VLAN. At some point before it gets a new IP address it starts to show up categorized under the VLAN network with the IP from the LAN. The device is not acessable on either network which is the correct behavior.  

0

• 

  Firewalla

  • November 05, 2023 05:06

  If you have the device DHCP enabled, and DHCP enabled on the VLAN, and the device can't be accessed is not the correct behavior ... am I reading this wrong?

  0

  Comment actions Permalink
• 

  Joshua Manton

  • November 05, 2023 19:34
  • Edited

  I guess correct behavior is subjective. IMO it is not the correct behavior. Showing a device with an IP for network A under network B is disturbing. If I had just changed the PVID I would expect it to stay on the original network but show as disconnected until it gets a new IP for the new network. At which point it disappears from the original and appears on the new network.

  0

  Comment actions Permalink

Please sign in to leave a comment.