Peer-to-peer VPN only working in one direction
I have a FWG on my main network and recently purchased a FWP for a secondary remote network.
I set up the peer-to-peer VPN using Wireguard and both boxes are connected.
(Client A) <---LAN---> (FWG) <---internet---> (FWP) <---LAN---> (Client B)
When I run a client (B) through the VPN from the FWP to the FWG I get the expected results -- the client traffic runs through the FWG network.
However, when I go the other direction, configuring client (A) on the FWG network to use the FWP VPN, the traffic does not run through the FWP but stays on the FWG network.
I tested connecting client A directly to the FWP using a local Wireguard client and the traffic behaves as expected -- client A traffic goes through the FWP.
What am I doing wrong?
-
In a site to site VPN, there is still the client and server. From this article https://help.firewalla.com/hc/en-us/articles/5515850433683-Firewalla-Site-to-Site-VPN If yours does not work this way, please let me know, we can create a case help you out.
"
If you have several networks on each site, Firewalla helps you manage communication between each network. While the VPN Client is active:
- Devices on the server network have access to client-side networks.
- Devices on the client network have access to server networks as long as the VPN Client is applied to those devices.
If you want to limit specific traffic, a combination of rules can help you easily manage access."
Please sign in to leave a comment.
Comments
4 comments