Site to Site across 3 sites
Hello, I've contacted support and they have not been the most helpful with this issue. I just purchased 3 firewalla gold boxes that are at 3 different sites. Each site is rather far away and has 3 different internet providers. I just need Site to Site across 3 Sites on with Internet traffic at each location to the local provider. With LAN1 at each on all 3.
Main Site (Comcast): Lan 1: 192.168.10.1/24 Smart Devices:192.168.11.1/24 Guest: 192.168.12.1/24
2nd Site (Spectrum) Lan 1: 192.168.20.1/24 Smart Devices: 192.168.21.1/24 Guest: 192.168.22.1/24
3rd Site (Verizion) Lan 1 :192.168.30.1/24 Smart Devices: 192.168.31.1/24 Guest: 192.168.32.1/24
It say in order to to this you must select the internet over the VPN in the profile "I've tried both VPN types (OpenVPN & WireGuard). I've also made route rules below.
However went tested it never routers traffic over the ISP only the VPN. When I go to whoismyisp.app it says Comcast (Primary Site). What am I missing? I could really use your help.
-
Not sure if this can be done just in the UI. But could you:
1) Create two WG Profiles on Main and install on 2 and 3 and set up as site to site
2) create profile on site 2 and install on site 3.
This way Main can talk to 2 and 3, and 2 and 3 can talk to main. Then 2 and 3 can talk to each other without having to route through the main ......
I have a Ubuntu 20.04 (at work) with WG installed on it to connect to my FWG+ at home. Then have a RaspberryPi at my parents house set up to connect with my FWG+. My iPhone has a profile set up to connect to my FWG+ and it can access both sites (This is of course using my Gold+ to route the traffic since my iPhone tunnels all traffic).
Please sign in to leave a comment.
Comments
3 comments