NETGEAR WiFi 6 Access Point WAX214 VLAN with Firewalla Gold?

Follow

DanS

• November 11, 2022 13:35

See https://www.amazon.com/dp/B08PQ3CRWK/ 

Is anyone using these to VLAN WiFi with Firewalla Gold?   I would like to simplify my network but don't want a headache with incompatibilities.  Is VLAN a solid standard spec-wise?

0

• 

  Firewalla

  • November 11, 2022 17:10

  This one should work; we tried the none WiFi 6 one before. Should work the same way as this TPLink AP, https://help.firewalla.com/hc/en-us/articles/360046231493-Firewalla-Tutorial-Network-Segmentation-Example-with-VLAN

   

  0

  Comment actions Permalink
• 

  DanS

  • November 11, 2022 19:55

  Thank you, I would like to remove plug power too.  Assuming this Netgear would work with VLAN too https://a.co/d/cH6UFCQ

  Every switch has to support VLAN, meaning no pass thru from dumb switch?

  0

  Comment actions Permalink
• 

  DanS

  • November 18, 2022 15:59

  More questions: The goal is use each AP for Trusted vlan1 (ssid1/2 5g and 2g), IoT Untrusted vlan2 (ssid3 only 2g), and Guest vlan3 (ssd4/5 5g and 2g).   So to my understanding since each AP would be connected to a unique switch port that port would be a Trunk.   This set up would also require vlan tagging so switch can properly router traffic. 

  Am I understanding this Trunk VLAN Tagging properly to share physical resources? 

  Thanks!

  0

  Comment actions Permalink

Please sign in to leave a comment.