dual WAN load balancing dchp problem

Follow

Abel Aguilar

• September 10, 2022 14:57

I am using both WAN routers  in double NAT.  cannot change that at the moment.  

First WAN uses my firewalla Lan subnet no problem. 

Second WAN under load balancing is handing out IP addresses from the dhcp server of the 2nd wan router instead of using firewallas LAN's subnet.     

 

so some devices are getting ip addresses from the 2nd wan subnet (192.168.1.0/24) instead of my LAN's subnet 192.168.3.0/24.    

 

anyway of telling my second WAN to use firewalla's DHCP address range ? 

 

HOpe this is making sense. 

0

• 

  Firewalla

  • September 10, 2022 17:23

  Check your wiring, it is just not possible for firewalla to release IP address from a WAN network, unless your client is also connected to that WAN ... 

  If your wiring does check out, then please open a case with help@firewalla.com

  0

  Comment actions Permalink

Please sign in to leave a comment.