Firewalla Purple using google Nest router and Netgear GS108PEv3 - 8-Port Gigabit switch.

So before I posted this I wanted to say did follow the guide from here it got so bad that I needed to get an adult, he was able to fix my first issues by setting up routes and two VLANs. The question I want to ask here is the following.

1. When using a browser I've noticed there is a delay that at first prevents access but then allows it, is there an option that I can change to fix this?

2. Not all devices are showing up in the device list or are coming through as the google router how do I correct this?

3. My Samsung tv isn't connecting to the internet at all I'm also noticing this anything that isn't a mobile platform or a PC (PS4, smart TV's, and smart hub's)

Set up is the following.

Purple

Router Mode

Local: Lan port 99.1 tagged Vlan 99 - for all traffic that isn't using the Wifi hard wired

Main: Lan port  64.1 no VLAN - used to allow interaction between different subnets and admin interaction with switch, firewalla, google router, and IP router/ modem.

WiFi: Lan port 88.1 tagged Vlan 88 - all traffic traveling the mesh network should be using this.

Routes are set up for 99.0/24 88.0/24,64.0/24 and 0.0/24 to facilitate access through the network, I also setup an internet for all on all locations. 

I currently have DNS untagged on and just turned off monitoring off for my Nest router, also every time I see a google AP node I make sure that they are not given an IP from the firewalla.

I've also set the DNS to 1.1.1.1 and 8.8.8.8

Switch

802.1Q is on with VLAN 88, 1, and 99 setup on the required ports.