Firewalla Gold Plus not showing network activity?

Configuration: XFinity XB8 (bridge mode) > port 4 Firewalla Gold Plus port 1 > 10 GbE switch > (QNAP TVS-h872t, Synology DS1821+)

TP-Link GE800 in access point mode connected to the FWGP. Vision Pro connected to GE800 SSID.

Playing a 4K video in Safari in the Vision Pro from both the QNAP and Synology:

1. FWGP "Live Throughput" shows minimal activity on VP (456 b/s)l.

2. FWGP "Live Throughput" shows minimal activity on Synology (10 b/s)

The video is playing at ~21 Mb/s on both the Synology and QNAP yet it isn't showing in "Live Throughput" for either the 2 NAS units or the Vision Pro.

Firewalla

January 19, 2026 00:04

Live througput is only for WAN side traffic. Your traffic is WiFi -> Ethernet (LAN).

D Moor

January 19, 2026 22:21

Thanks. Sorry for dumb questions.

So I have to choose between monitoring intranet activity via the GE800 in router mode or internet activity via the FWGP in router mode? Do you know of anyway to do both?

January 20, 2026 16:29

Only way is doing double NAT, and run the two routers in series. Doing so, one of these units will not be able to see all the devices behind them due to NAT.

Firewalla Gold Plus not showing network activity?

Comments

Didn't find what you were looking for?