Configuring VLAN using TP-Link SG2008P as DHCP Server

Hello,

I have a Firewalla Gold and I'm trying to setup an isolated VLAN for my outside devices.  I created VLAN 300 network on the firewalla gold.  I also turned off the DHCP server since my wife's mach-e has issues connecting to the firewalls dhcp server.  I have a managed switch, SG2008P, using the Omada controller I created the same Outside VLAN with id 300.  I then went into the switch settings and under config, enabled the VLAN interface for 300.  I edited the VLAN and enabled DHCP server with the same IP range as the VLAN created in the firewalls.  I also associated VLAN 300 with the EAP225 AP so any clients connecting would connect to the vlan.  For some reason, clients are not getting an IP address assigned.  I had no issues when firewall had the dhcp server enabled, but for some reason the switch is no assigned the IP when I try to use it as the dhcp server.  Any help is appreciated.  Thanks