Neep Help to install portainer , And another Question ?
Hello Every one,
Got the Purple and its great, trying to install the portainer to management easier but can't seem to know how to run or reaching it followed this guide
https://homenetworkguy.com/how-to/install-pihole-on-raspberry-pi-with-docker-and-portainer/
can't reach the ip : 192.168.100.1:9000 (the purple in Router mode by PPPoE the user and pass) i can ping just fine the ip above is there any guide to set it up for firewalla step by step like for the Adguard home & Pihole ?
Another question how i can install the docker and the data to sd card ?
-
Here is how to mount an SD card on purple. https://help.firewalla.com/hc/en-us/articles/4415441687443-How-to-use-an-SD-card-as-external-storage-in-Firewalla-Purple
you will need to set your volumes in yaml to the appropriate mount point for the SD Card. -
@saleh, you should see something like this in your yaml. The part after the colon will depend on the specific docker image...
volumes:
- '/data/homebridge:/homebridge'
Where the first part is the path where the container will store stuff. So change that to something like,volumes:
- '/mnt/data/homebridge:/homebridge'where '/mnt' is the SD card
-
I Give up upon the portainer just dosnt seems to work with me.
I installed the Adguardhome and worked perfectly and set it on the mnt path on the sd card, but a new problem appeared, i set the ip to it 192.168.10.10 i can access from the LAN but activating the vpn server can't reach the ip or a third party vpn (Nordvpn).
How to allow the vpn ip range (10.0.0.0) to access the 192.168.10.10 ?
-
Saleh,
I got Portainer running on my Purple, but ended up using host networking. Instead of any "-p" options (like -p 9000:9000), I did --network="host" instead.
I think I'd have to mess with routing tables to map the specific ports, so host networking is good enough for me. Maybe someday...
Please sign in to leave a comment.
Comments
5 comments