VLAN setup with managed switch, and AP on switch ports.

Follow

Paul

• January 24, 2022 21:07

hello all,

hoping someone can help.

I have a managed tplink switch (TL-SG1210MPE) i have connected to my firewalla gold.

Anything i connect to the switch gets an IP and works fine.

But i also want to connect some wifi tplink access points (EAP615-Wall) to the switch which allow vlan, but when i connect to the access points i get no IP assigned and none of the connected devices show up in firewalla.

I am wanting to using VLAN on the access points which are connected to the TPLINK Switch.

The managed switch, i also want to have some VLAN setup on only some of the ports.

Is this possible, to have 3 layers of VLAN....

Firewalla ( has the VLANs created with IDs )
--> Switch ( VLAN IDs assigned on some ports )
-----> APs ( VLANs assigned on different SSIDs )

0

• 

  James Willhoite

  • January 28, 2022 21:01

  It is possible. I too have TP-Link APs. Take a look at this post and see if it helps

   

  https://help.firewalla.com/hc/en-us/community/posts/360051954114-How-to-configure-Firewalla-Gold-in-Router-mode-with-switch-and-VLANs?page=1#community_comment_4409792068371

  0

  Comment actions Permalink

Please sign in to leave a comment.