I purchased a TP-Link SG1016PE switch (hardware version 3.20). Updated to latest firmware.
I spent the weekend configuring VLANs on the Firewalla and switch. Had some issues, so I rolled everything back to unmanaged VLAN1 and deleted the VLANs on Firewalla.
For my testing, I had untagged VLAN1 which is my default from before, 192.168.1.0/24 (connect to port 1 on the Firewalla)
I created an additional VLAN2 tagged, 192.168.2.0/24 and (connected to port 2 of the Firewalla).
I picked a port of a device (Nvidia shield in this instance) that I could test on, and tagged it to VLAN2, and removed it's membership from any other VLANs. I rebooted the device, and even unplugged/plugged back in the ethernet cable. The device was unable to get an IP address. I even tried setting a static IP address and it could not communicate on the network.
Any suggestions what's going wrong?
edit: adding configs. note, the end device is connected to port 7 on the switch. the firewalla is connect from its port 1 to port 16 on the switch
Please sign in to leave a comment.