AP7 Wall Mount

I made a Wall mount for the AP7. It is a back orientation, but I can configure for a side mount if someone wants it.  Ill attach a link for the STL.

I would print with at least 50% infill. I did mine out of PETG, but if inside PLA would be fine. If you want a fan (highly recommended after seeing the stock temps) it is just a 5V USB powered 40X40X10 from amazon and is powered by the AP7.

https://makerworld.com/en/models/1365091-firewalla-ap7-holder#profileId-1410589