Synology Dowload Station... Natting does not work
I've setup this network architecture (with Vodafone Fiber wired connection):
VF/STREET --> ONT --> VF POWER STATION (only for voice) --> FW GOLD (real router) --> WIFI MESH (in access point mode)
My VF Power Station has been configured in STATIC NAT to pass all the web traffic to the Firewalla, that acts as the real router, with DHCP and the like. The VF Station (other than managing "voice" - it has the traditional phone line plugs) is even receiving the fiber cable transport from the ONT... that could not be accepted in the Firewalla (from what I know).
PROBLEM WITH MY Synology DS1019+ NAS Server:
Although I've forwarded the used TCP/UDP ports, some services requiring external comms are not working anymore (for instance a classical app that uses ports, such as the torrent module does not work).
I'm afraid this problem originates from the "double router" in the middle...the VF Station (10.0.0.* network, in Static Nat to the FW Gold) and the FW Gold (10.0.1.* newtork). UPnP is enabled. With the old configuration (VF Station-only) everything did work perfectly.
Same problem using qBittorrent in MacOS (with uPnP): the ports are forwarded, but the client does not work (recognizes the magnet both down/up speed are stuck at zero Kbps).
Yet I think this could be solved/repaired: any advise?
Many thanks
-
This is a more clear schematic of my studio network. Unluckily, at the moment, I cannot remove the VF Power Station, 'cos it is needed to manage the traditional voice phone line (and translates the incoming fiber cable to wired ethernet).
To my knowledge the Power Station should transfer any port incoming traffic (both in and out) to the firewalla, that then manages the dynamic natting of required ports. But it doesn't work for torrent clients: maybe a firewall setting?
Please sign in to leave a comment.
Comments
4 comments