Rule: Allow/Block only on single device from Alarm.

Follow

Neoculture

• March 07, 2019 00:12
• Edited

In my list of alarms, I often get ones in the following format:

"999.999.999.999 is accessing post XYZ of device ABC"

I then get the option to Allow or Block. If I allow, the only options are:

(1) Allow this time (but be warned about it again next time)

(2) All *all* devices to access 999.999.999.999 permanently.

 

What I would like is the option to allow/block device ABC from accessing access (or being accessed from) the IP, but for the alarm to pop up again for any other devices. In other words, I'd like the Allow/Block rule to be generated for THIS device (ABC) instead of for ALL devices.

0

• 

  Firewalla

  • March 07, 2019 00:21

  Does make sense.  What you want is to give exceptions per device.   Will log this issue and see what we can do. (no promises)

  0

  Permalink
• 

  David Bonds

  • April 12, 2019 02:41

  I believe I have the same request, but very specifically my Wyze cameras are alerting for "Abnormal uploads" to amazonaws.com - I get several choices to allow various granularity of the destination site (*.amazonaws.com and a couple more specific), but the rule would apply to ALL devices on my network (allow ALL to upload to *.amazonaws.com).     

  Oddly, I have seen other devices alarming on uploading data to other sites (xboxlive.com comes to mind, and I think a couple of others), but those cases I AM offered the option to allow to *.xboxlive.com for that device only.     Any ideas why it's only trying to make it global for that one scenario?    Have 3 wyze cams and its the same for all three.

   

  0

  Permalink
• 

  Matt Hoag

  • April 30, 2019 02:52

  Also, ive been seeing my Wyze cam frequently alerting on AWS IP addresses rather than FQDN. Could there be an option to write IP network rules (allow/block 52.192.0.0/11)?

  0

  Permalink

Please sign in to leave a comment.