Firewall showing EAP as offline but wifi/internet works
I connected a standlone Tp Link EAP 773 to FWD Gold SE and was able to configure VLAN and SSID to VLAN mapping and everything works.
But after sometime after VLAN configuration, EAP is showing as offline in Firewalla but connecting devices to EAP wifi and internet is working. I restarted EAP several times and no luck and firewall is still showing EAP as offline
-
Initially, I changed the default VLAN configurations and guess that caused the offline issue. Thanks for the pointers.
I reset Firewalla again and below is my network setup. EAP is showing as online but once did VLAN to SSID mapping in my EAP, i cannot access EAP configuration page from any VLAN(SSID) or from my other LAN port 1.
Basically, I want to access my EAP configuration page(in LAN 2) only from LAN 1 and VLAN 33. I am not able to get it to work and not sure why I cannot access configuratiopn page. I even created a rule to allow Outbound Traffic from Mine(LAN 1) to EAP(LAN 2) but still no luck.
I am still learning thigs and pretty sure I missed something obvious but couldn't figure out what.
-
I can netcat to EAP(192.168.114.182) port 80 and curl inside firewalla box(ssh) but cant do the same from my devices in Mine network(192.168.21.229).
Getting this error when I curl from my Device in Mine network. I have created a Rule in EAP network to allow port 80 from Mine network
C:\Users\Admin>curl 192.168.114.182 -vvv
* Trying 192.168.114.182:80...
* connect to 192.168.114.182 port 80 from 0.0.0.0 port 56687 failed: Timed out
* Failed to connect to 192.168.114.182 port 80 after 21044 ms: Couldn't connect to server
* Closing connection
curl: (28) Failed to connect to 192.168.114.182 port 80 after 21044 ms: Couldn't connect to server
Please sign in to leave a comment.
Comments
3 comments