TP XE75 mesh with Firewalla Blue not working

For my home setup i have the ISP modem (Spectrum) connect to the mesh router and from mesh router the Lan connects to a switch on which the firewalla is connected. The firewalla is running in simple mode (Arp spoofing). This was working ok with Google mesh. I recently upgraded the google mesh router to TP link XE75 and now i see the main router to the sattelite units connectivity keeps getting disconnected randomly leading to wireless connectivity throughout the house.

I disable the firewalla and the issue goes away. The mesh is stable and wireless access in the house is good.

ISP---Deco Mesh router---Switch(1Gig)---Firewalla Blue (simple mode)

Firewalla

May 20, 2024 16:00

Very likely, you are running into compatibility issues with ARP spoofing on the Deco Mesh.

Try these

1. Make sure you turn off monitoring on the Deco Mesh nodes.

2. Try "experimental simple mode"

3. If both above doesn't work, you should use DHCP mode

Prashant Karunakaran

May 20, 2024 19:38

Thanks for the suggestion. Will try it out

May 21, 2024 00:57

Disabling Monitoring for the TP link satellite on Firewalla resolved the issue. Thanks for the help

TP XE75 mesh with Firewalla Blue not working

Comments

Didn't find what you were looking for?