Adding Unifi Controller Docker to FWG

I am new to Docker, not extremely knowledgeable when it comes to networking, as it is definitely not my background. I try to read and find videos as best I can to figure out what to do.

Have a FWG set in router mode behind my ISP and has worked flawlessly for well over one year. I have 4 Unifi APs that were set up prior to my FWG installation, and they are fine, but want to set up the Unifi controller to update and fine tune the APs.

I found the recommendation for the script from Michael Bierman - https://github.com/mbierman/unifi-installer-for-Firewalla

I have used WinSCP and have SSH into my Firewalla Gold and can see the directory.

Do I know need to place the script previously mentioned into Open Terminal Window in SCP and run that? Does it go to the root directory of the FWG or somewhere else?

I currently have my network LAN set up as 192.168.X.X. Will that get automatically changed when the Unifi controller gets set up into 172.16.XX? Or is there a way to keep that the same?

Sorry for the newbie questions. I know I'm not an expert, and hate to brick the FWG or knock my internet offline for hours as I try to figure things out.

Thanks for your help and advice in advance!

Xamaracer

June 20, 2023 02:18
Edited

Hey, I apologize I don't have an answer to your question, however Firewalla does have a guide on how to setup Unifi Controller Docker on FWG. Have you seen that yet? The guide also uses 172 in their examples, just replace those with your network ranges.

https://help.firewalla.com/hc/en-us/articles/360053441074-Guide-How-to-run-UniFi-Controller-on-the-Firewalla-Gold-Series-Boxes

Adding Unifi Controller Docker to FWG

Comments

Didn't find what you were looking for?