Configuring Firewalla Gold to manage VLAN with managed switch

Follow

Adam S

• January 27, 2023 20:15

Hello,

I have an issue with my TP-Link Omada Jetstream managed switch (TL-SG2008P) allowing traffic between wireless VLANs when I have the Firewalla Gold set not to allow it for the loT and guest networks.  I believe the managed switch is handling this VLAN traffic without forwarding it to the router.

My setup is:

ISP <..> Firewall Gold <..> TP-Link Omada Jetstream (w/Controller attached) <..> 2 TP-Link EAP660HD WAPs (mesh) <..> clients

Is there a way to have the Jetstream switch forward the traffic to firewalla via rule setup on the web interface?  Or do I need to use an unmanaged switch to resolve this?

0

• 

  Firewalla

  • January 28, 2023 03:33
  • Edited

  Did you setup VLAN's correctly? if you did, traffic should always go to firewalla. 

  Check this, see if your firewalla VLAN (LAN) configuration has IP settings and double check that against the device IP, make sure they are all in the same range for the same VLAN and different ones for different VLAN. I suspect your devices may all in the same VLAN

  0

  Comment actions Permalink

Please sign in to leave a comment.