Site to Site routing

Follow

Glenn Miles

• December 14, 2022 18:57

I have a Gold on the server side and a Purple on the Client side.

I want to be able to set my client Outbound Internet policy to Direct due to VPN slow speeds. 

When set to Direct, I can get to the different physical networks at the server location, but the Routes setup in the Gold do not work.  I added new Routes on the client to go to the Gold connection, but still do not work.

If I change the client Outbound Internet policy to VPN, it all works as I need it to.

1

• 

  Erik Neville

  • December 15, 2022 15:00

  yes i am having the same issue. does not look like policy based routing is working.

  0

  Comment actions Permalink
• 

  Erik Neville

  • December 16, 2022 20:49

  I have opened a support ticket for this issue

  0

  Comment actions Permalink
• 

  Glenn Miles

  • December 26, 2022 14:23

  Where they able to resolve this for you?  If so, what was the fix?

  0

  Comment actions Permalink
• 

  Glenn Miles

  • December 29, 2022 10:25

  Problem resolved.
  Remove yourself from the VPN Client and add all your "remote" subnets through the Routes.

  VPN Client config
  * Remove the Group or computers from the "Apply To" in the VPN Client.
  * Select VPN for the Internet Outbound Policy

  Routes config
  * Add all the subnets on the server side you need to reach, including the peer site subnets listed in the VPN Client
  * Point the interface for these routes to the VPN client

  0

  Comment actions Permalink

Please sign in to leave a comment.