Here is my current setup:
Router: Nighthawk X4 R7500
Firewalla is in DHCP mode
So I have two fixed IP devices that I have port forwarding rules on. Prior to installing Firewalla I could access both of these both externally and internally using an existing DDNS and port numbers. Both of these rule were configured in the router. Both have monitoring turned off.
Since getting firewalla up and running and stable, I can only access the devices externally using the DDNS and internally using the IP address. For the moment, I'm hesitant to switch to using the reserved firewalla range, only becasue when firewalla loses contact with the internet, i'm not sure I'll be able to access those devices.
Any thoughts on what's causing the problem?
Please sign in to leave a comment.