App Release 1.46: live throughput stats, bridge mode, customized DoH

Follow

Comments

15 comments

  • Avatar
    Jim Clark

    The Live Throughput feature is great. It's nice seeing how much bandwidth is being used in both directions.

    BUT... It would be even better if we could drill down on it further to see which devices were using the bandwidth. Is that a possibility for expanding this feature?

    2
    Comment actions Permalink
  • Avatar
    Firewalla

    @jim, likely detail flows will come up soon in 1.973 release.  So do expect us to focus more on the stats part

    2
    Comment actions Permalink
  • Avatar
    Sukumar Patel

    Would it be possible to show the list of blocked flows inside the rule? This way we can know what flows that rule blocked.

    Along with the bandwidth usage can you also show the maximum speed that has been logged in the last 24 hours?

    1
    Comment actions Permalink
  • Avatar
    Blake Grover

    Any news on if the live throughput mode will get ported to the normal Blue version? :)

    1
    Comment actions Permalink
  • Avatar
    James Cheung

    I agree with Jim Clark, it'd be great to have a more detailed break down of the traffic. :)

    0
    Comment actions Permalink
  • Avatar
    Firewalla

    @Dave, the 1.46 release is primarily an app-only release, it should not disturb anything. Also, in case it is box update, it will always happen 2am to 4am your local time. Please do send an email to help@firewalla.com, we can take a look and see if it is something else.

    0
    Comment actions Permalink
  • Avatar
    Meir Zisu

    For the live throughput option,

    Is it showing the throughput of the WAN?

    Can I see the throughput  for a specific device as well?

    Thanks

    0
    Comment actions Permalink
  • Avatar
    Chris Holmes

    I am not sure which is more impressive; the thirst for more features by users as soon as something new is released ... or Firewalla's ability to continue to deliver more features.  Either way, keep it up @firewalla.

    0
    Comment actions Permalink
  • Avatar
    Vincenzo Corsaro

    It would be very useful if in addition to the blocked IP address Firewalla also showed the domain name of the site, because if I am browsing and a site is blocked by the Firewalla, how can I understand what it is? since I've blocked thousands of them?

    From the tools provided by Firewalla (Whois or similar sites), it is not easy to understand which site it is.

    Thanks in advance and congratulations for the work done 👍🏻

    P.S. I am attaching the screenshot below, of what I see as soon as I enter the network traffic screen, to try to identify the site that I previously blocked, how can I understand which one it is among all these IP addresses? especially if several are blocked in the same minute?

    P.P.S. Another thing that I recommend you to improve is the analysis of dangerous sites, because too often the message "malicious site" appears and since the domain name (but only the IP address) is not indicated, I block everything in doubt , but then I discover that most of them were harmless and I find myself almost all websites blocked.

    That is why it is important to add the domain name in addition to the IP address, because with that I know exactly what we are talking about.

    0
    Comment actions Permalink
  • Avatar
    Firewalla

    Deco X60 you should be able to run Bridge mode + Mesh; Please double check that. 

    0
    Comment actions Permalink
  • Avatar
    Firewalla

    @blake, please watch out for our announcements, very likely 1.47 will give the live stats capability to the blue. It may not be as smooth as the gold, blue+, but it should work.

    0
    Comment actions Permalink
  • Avatar
    Firewalla

    Tap on these sites, it is very likely they are blocked from "outside" trying to get into your home/business network. And likely they are being blocked by the firewall; Since these are IP scan's, they do NOT map to any domain. These are not always bad, since some are "research"

    0
    Comment actions Permalink
  • Avatar
    James Cheung

    @Firewalla, I'm so looking forward to this. Thanks for all the hard work.

    0
    Comment actions Permalink
  • Avatar
    Firewalla

    Let me forward your request to our designer and see. 

    0
    Comment actions Permalink
  • Avatar
    Jeff Duvio

    Question in regards to Transparency Bridged Mode. Would this allow me to change my AP's to Mesh mode? Currently the only way to use my Deco X60's with Firewalla in Router mode, to turn off Mesh, and use them as wireless APs.
    I am only guessing here though. Hoping to turn MESH back on, without having to overhaul the network. 

    0
    Comment actions Permalink

Please sign in to leave a comment.